Problems needing attention when choosing stainless steel filter element

The selection method of stainless steel filter element filter is based on its filtration precision (the particle size of impurities removed), there are four kinds of coarse filter, ordinary filter, precision filter and special fine filter, which can filter out more than 100μm, Impurities with sizes of 10-100 μm, 5-10 μm and 1-5 μm. ​​ When choosing a stainless steel filter element filter, the following points should be considered: 1. The filter core has sufficient strength and will not be damaged by the action of hydraulic pressure. ​​ 2. The filter core has good corrosion resistance and can work for a long time under the specified temperature. ​​ 3. Sufficient flow capacity can be maintained for a long time. ​​ 4. The filtration precision should meet the predetermined requirements. ​​ 5. The filter core is easy to clean or replace.   because Therefore, the stainless steel filter element should be selected according to the technical requirements of the hydraulic system, according to the filtering accuracy, flow capacity, working pressure, oil viscosity, working temperature and other conditions.